0430 546 824 Get a quote

Timber framing carpenters, Sydney

Cut-on-site timber framing for Sydney builders

Single and double storey homes, granny flats, extensions and roofs, framed straight and plumb to your plans and the engineer's details. Over six years on the tools. Free quotes from your drawings.

Send your plans Call Noman
  • 6+ years on the tools
  • Free quotes from your plans
  • Site visits within a week

Cut on site

Studs, plates, beams and rafters are measured and cut on the slab to suit your plans. When the drawings change, we adjust on the spot instead of waiting on a factory re-make.

Working to your program

Tell us your slab-down date and we tell you what the crew can hold before we commit. Then we turn up on that date and keep to the sequence.

Framed to the drawings

Bracing, tie-down, lintels and beams follow the engineer's details. Every frame is handed over plumb, straight and ready for the frame inspection to be booked.

One crew to lock-up

Frame, blueboard, cladding, eaves and fascia from the same crew. One quote, one contact, and one less trade to schedule between frame and render.

House framing Sydney

Frames stood straight, on program, first time

Zakariya Woodworks is a timber framing crew based in Sydney and run by Noman, a framing carpenter with over six years on the tools. We read the plans, set out on the slab, and cut the studs, plates, beams and rafters on site to suit the drawings. Walls go up plumb. Beams land on their bearing points. The frame is braced, tied down and ready for inspection when we leave.

Builders, developers and project managers call us when they need a framing carpenter in Sydney who turns up on the slab-down date and does not need chasing. Homeowners call us about granny flats, extensions and first-floor additions. Either way, the job is priced from your plans and framed to the engineer's details.

Precise, reliable and professional workmanship
Straight walls make every trade after us quicker: the plasterer, the tiler, the kitchen installer. We check plumb and line as we go, not at the end, and we fix what is not right before the inspection, not after.
From set-out to lock-up carpentry
Wall and roof framing, trusses and floor systems, then blueboard, cladding, eaves and fascia if you want them. One crew, one quote, and fewer trades to schedule between the slab and lock-up.
Book a site visit More about Noman and the crew
Floor joists and wall frames, Sydney
View along floor joists and wall frames with a yellow LVL beam, looking over a suburban street
6+years on the tools

01What we frame

Timber framing and carpentry services

Cut-on-site framing across Sydney for new homes, granny flats, extensions and stand-alone roof and floor scopes, plus the external carpentry that follows the frame.

All services

02How we work

From your plans to lock-up in four steps

No drawn-out sales process. Send the plans, get a price, book the crew.

  1. Step 1

    Send your plans

    Email the architectural plans and the engineer's drawings to noman@zakariyawoodworks.com.au. Tell us the site, the slab-down date and who is supplying the timber.

  2. Step 2

    Free quote, site visit if needed

    We quote from your plans at no charge. If the job needs a look, for example an extension tying into an existing house, we meet you on site or at your office within a week.

  3. Step 3

    Lock in the dates

    Scope, price and start window are confirmed in writing. We plan the timber drop and the crew around your program, including estate access and delivery limits.

  4. Step 4

    Frame, check, hand over

    Set-out, walls, floors and roof go up to the drawings. We check the frame is straight, braced and tied down, then hand it over ready for inspection and the next trade.

For builders, developers and project managers

A framing crew that turns up on the date and frames to the drawings

Most of our work is subcontract framing for builders running a program. You send the plans, the engineering and your slab-down dates. We tell you what the crew can hold, then we frame to the drawings and hand over ready for the frame inspection.

Frame-only or frame to lock-up carpentry stage, labour only or supply and install. One point of contact in Noman, who is on the tools and answers the phone.

  • Cut-on-site frames for single and double storey homes, duplexes, granny flats and additions
  • Labour-only pricing with builder-supplied timber, or supply and install
  • Honest dates: we commit to what the crew can frame properly
  • Set-out, beam and detail issues flagged early, before they cost you program
  • Blueboard, cladding, eaves and fascia quoted with the frame if you want one crew to lock-up
Send your plans How we work with builders
Double-storey timber house frame with red LVL beams under a blue sky on a Sydney building site
Double-storey frame, western Sydney

03Projects

Recent frames on Sydney sites

Blue treated pine, red LVLs and straight top plates. Real photos and site video from our own jobs, not stock images.

See all projects
  • Double storey timber house frame with blue treated pine wall studs and joists and red LVL beams cantilevered at the upper floor, seen from the street through a temporary site fence with certifier signage, under a blue sky with clouds
    Double storey house frame at first-floor stageGround floor walls, first-floor joists and upper wall frames up, with red LVL beams carrying the cantilevered sections. Floor sheeted below, roof still to come.
  • Low-angle view looking up at an upper floor timber frame: blue treated pine studs, top plates and joists with red LVL beams, structural flooring visible at floor level, against a blue sky with clouds
    Upper floor frame with red LVL beamsLooking up at the first-floor walls from the ground. The red LVLs are the beams carrying the loads the engineer drew. The blue is treated pine framing, plumbed and braced.
  • View from above along blue treated pine wall frames stood on a concrete slab, with joists fixed across the top plates and a yellow LVL beam running the length of the frame, suburban houses and a metal fence beyond
    Wall frames and joists on a slab, from aboveStraight down the length of the frame. Joists across the top plates, a yellow LVL running through the middle, and the slab swept underneath.
  • Single storey treated pine wall frames stood on a concrete slab in a new housing estate, with metal strap bracing and yellow bracing sheets, new homes with metal roofs and green hills in the background under an overcast sky
    Single storey wall frames in a new estateExternal and internal walls stood and braced on a new estate slab. Strap bracing and sheet bracing in, ready for the roof.
  • Cut timber roof frame seen from above: blue treated pine rafters pitched to a central ridge over the wall frames, with suburban rooftops and trees beyond under a grey sky
    Cut roof frame from aboveA conventional cut roof, rafters pitched to the ridge on site. This is where a cut-on-site crew earns its keep.

04Service areas

Where we frame

Sydney metro, with most of our house framing in the growth areas of Western Sydney, the Hills, the south west and Macarthur, and granny flats and additions across the established suburbs.

All service areas

Questions

Questions builders and homeowners ask us

Straight answers on what we do, who we work for and how to get a price. Anything else, call Noman.

Call Noman
01What does Zakariya Woodworks do?

We are a Sydney timber framing crew. We frame single and double storey homes, granny flats, extensions and first-floor additions, and we pitch roofs, install trusses and fix floor systems. Most frames are cut on site from your approved plans. We can also carry the job on to blueboard, cladding, eaves and fascia so the external carpentry is done by one crew.

02Do you work for builders or homeowners?

Both. Most of our work is subcontract framing for builders, developers and project managers who need a crew that turns up on the date and frames to the drawings. Homeowners planning a granny flat, extension or renovation are also welcome to call. If you already have a builder, we can quote them directly for the framing scope.

03How do I get a quote?

Email your architectural plans and engineer's drawings to noman@zakariyawoodworks.com.au or call 0430 546 824. We quote from your plans, and quotes are free. If you would rather walk the site first, we can arrange a site visit or a meeting within a week of your call.

04Do you supply the timber or just the labour?

Either. Builders with their own supply accounts often want labour only, and we frame with the timber delivered to site. If you would prefer we handle supply, we price the frame as supply and install. Tell us which you want when you send the plans and we will quote it that way.

05Which parts of Sydney do you cover?

The whole Sydney metro. Much of our framing is in the growth areas of Western Sydney, the south west, the Hills and north west, and Macarthur, where most new single and double storey homes are being built. We also frame granny flats, extensions and additions in established suburbs across the inner west, the south, Sutherland Shire and the northern beaches.

Get a quote

Send your plans and we will price the frame

Email the plans and engineering to noman@zakariyawoodworks.com.au or call 0430 546 824. We quote from your drawings at no charge, and can meet on site within a week.

Request a framing quote

Tell us what you are building and where. Attach the plans if you have them, or email them to us separately after you send the form.

PDF plans and engineering can be emailed to noman@zakariyawoodworks.com.au if they are too large for the form.

We use your details only to respond to this enquiry. See our privacy policy for how we handle your information. Privacy policy.